Technical data

• Material: PVC UV
• Thickness: 1,5 mm
• Weight: 1200 g/m²
• Height: 4,75 cm
• Length of the roll: 50 m
• Color: RAL6005 green

Application and properties

• Made of weather, dirt and UV resistant PVC;
• 50 mb tape roll
• 4.75 cm high, suitable for standard panel fences;
• Weight 1200 g/sqm
• Thickest thickness on the market: 1.5 mm;
• Ribbed pattern
• Perfect as a cover for fence panels and balcony;
• Provides aesthetics and privacy;
• Protects from wind, snow, dust and noise;
• Can be combined with other colors of Quest® Lux fence tapes
• Installation does not require additional terminal clamps;
• Can be cleaned with water and a pressure washer
• Extremely easy installation with scissors and tape measure

Quest® Lux Fence Tapes attach to fence panels, balconies and other structures to provide privacy and protection from wind, snow, rain, dust and noise. The tape fits over standard fence panels and fills them tightly, creating an aesthetically pleasing appearance and providing more privacy.

Quest® Lux fence tape distinguishes itself from the competition with a high grammage of 1200 gsm and a thickness of 1.5 mm, which, combined with a high-quality, special PVC compound, results in a product that is extremely resistant to weather conditions such as wind, snow, rain and UV radiation. The possibility of combining colors and the various permutations allow any arrangement of the fence. The tape is extremely elastic and therefore does not require fastening clips, but perfectly rests on the wire or fence post. Its exceptional weather resistance and elasticity allows cleaning with a garden hose or a pressure washer, so your fence will be clean and attractive even after many years.

Assembly

Assembly is very simple and requires no special skills or tools, just a pair of scissors, a tape measure and some good will.

The tape can be assembled directly from the roll by pulling it one by one through the eyelets of the fence panel according to your own arrangement, for example, every 2 or 3 eyelets, and cut to the desired length.

However, due to the weight of the product, which provides such amazing properties, we recommend assembly in prepared sections, which greatly improves the precision of installation and is possible for literally anyone.

1. Measure the length of the span with a meter stick,
2. Check that all the bays have the same length.
3. Prepare the first strip - cut the desired length with scissors or a knife, increasing the length by about 1.5%. Depending on the hole system, each mesh is usually 3 cm for a panel length of 250 cm.
4. Attach the first strip and check if it fits perfectly in length.
5. Prepare the next strips and install them in the same way as the first one. The fence panels are symmetrical, so don't worry, they will all fit perfectly.
6. The tape has sufficient rigidity, and no fastening clips are required. The end of the tape is simply rolled up so that it clasps the wire.
7. The tape is smooth with a fine corrugation and very stain resistant, so it is maintenance free. However, if it gets dusty over the years, you can freshen it up with a garden hose or a pressure washer, and don't worry: the high water pressure won't harm it.