Product added to cart
Application and properties
|
INSTALLATION - Instructions
- assembly should take place at room temperature. In case of low temperatures, the profiles should be heated before installation using warm air or water
- clean and align the surfaces and sides of the stairs
- installation of wall profiles - P1, P2
- assembly of the wall system strip LP if the stage turns out to be long enough that the angles P1 and P2 do not touch each other
- assembly of the cladding on the risers
- mounting the stair nosing - applies to RD, PMW
- assembly of the cladding on the riser
- mounting the stair nosing - for RDP
- assembly of external elements of the Z1, Z2 system
- installation of a LZ angled corner bar if the step proves to be long enough that the Z1 and Z2 angles do not touch each other
Notes:
- cut the profile to the exact length using a QUEST® knife or shears
- apply assembly glue according to glue manufacturer's instructions or use QUEST® adhesive tape
- elements Z1, Z2, P1, P2, LP and LZ - glue on the whole surface
- stair nosings PMW, RD, RGP - glue on the entire surface of the upper nose (do not stick the vertical lip to the degree)
- press firmly to the step and allow the glue to dry
- when using the QUEST® adhesive tape, the steps can be used after 3 hours.
EAN | 5905548222196 |
---|---|
Model | P2 |
Unit of measurement | szt |
J.M. | pcs |
fluorescent | No |
Nazwa koloru | czarny |
Interior wall element P2, black
€5.10
In stock
| Shipping from: 24h
Estimated transport time: 2-4 days
Estimated transport time: 2-4 days
SKU
P2-CZARNY
The element of the Quest® System Stair system, improves the aesthetics and the ability to care for cleanliness within the stairs.
dimensions:
Inner length - 15 cm
The width of the element - 4 cm
External length - 19 cm
Thickness of plastic - 4 mm