Description

Rail profile in premium version. Our company's offer includes other profiles with increased product parameters. 460-56, 460-58 

• Railing handrail profiles are made of soft PVC, which is a thermoplastic, hence its features depend on the temperature (immersion in hot water facilitates the laying process).
• Alternating heating and cooling allows installation in tight arches of stair balustrades 
• Rail profiles give an attractive appearance to communication routes in residential buildings, office buildings or single-family houses.
• The use of PVC railing cladding not only improves functionality and safety, but also enlivens the interior and adds aesthetics.

Benefits

Installation

• applied on heat (after heating, eg in hot water) for a flat bar, width 40 mm, thickness 5-8mm
• they are made of soft Pvc,
• rail bar should be mounted on a previously prepared flat bar, whose surface should be clean and smooth, without any unevenness that arise during welding
• the profile should be warmed up so that it is soft and flexible, the safest way is to bath the skirt in hot water, which will heat the profile
• the installation of the profile takes place in the following direction: from top to bottom,
• the profile can not be stretched over the length, because its excessive stretching at the moment of cooling will result in a return to its original shape
• installation in curves requires a stronger heating of the profile from the inside, which will facilitate its assembly
• due to the shrinkage of the material from which the product is made, it is recommended to leave a longer section of about 3-5cm until it is completely cooled and then cut to the correct length

Technical Drawing