Technical data

• Material: PVC
• Thickness: 1.2 mm
• Weight: 1200 g/m²
• Color: RAL1019 beige
• Height: 19 cm
• Roll length: 26m
• Available in ready-made strips of 2.525m - span standard

Application and properties

• - Made of weather, dirt and UV resistant PVC;
• - 26 mb of tape in a roll
• - 19 cm high , fits standard panel fences;
• weight 1200 g/sqm
• - The largest thickness on the market 1.5 mm;
• striped pattern
• - Perfect as a cover for fence panels and balcony;
• - Provides aesthetics and privacy;
• - Shields from wind , snow, dust and noise;
• - Can be combined with other colors of QuestR Lux fence tapes
• - Installation does not require additional termination clips;
• can be cleaned with water using pressure washers
• extremely easy installation with scissors and tape measure

Quest® Lux fence tapes , apply to fence panels , balconies and other structures to provide privacy and as a shield against wind, snow, rain, dust and noise. The tape fits standard fence panels tightly filling them creating an aesthetically pleasing appearance and providing greater privacy.

Fencing tape Quest® Lux, stands out from the competition with a high grammage of 1200 g / sqm and a thickness of 1.5 mm, which in combination with high-quality dedicated PVC compound gives us a product extremely resistant to atmospheric conditions such as wind, snow, rain and UV. The possibility of combining colors and various possibilities of interlocking allow for any arrangement of the fence. The tape is extremely resilient, so no mounting clips are required, perfectly rests on the wire or fence post. Extraordinary resistance to weather conditions and elasticity allows to clean it with a garden hose or pressure washer, your fence even after many years can still be clean and look great.

Mounting

Installation is extremely simple and does not require special skills or tools, all you need are scissors, a tape measure and some good intentions.

The tape can be mounted directly from the roll by threading it through the meshes of the fence panel according to your own arrangement, for example, every 2 or 3 meshes, and cutting it to the desired length.

However, due to the weight of the product which provides such amazing properties, we recommend mounting in pre-prepared sections, which will definitely improve the precision of installation and will be possible literally by anyone.

1. Measure the length of the span with a yardstick,
2. Check that all the spans have the same length.
3. Prepare the first strip - cut off the desired length using scissors or a knife increasing its length by about 1.5%. Depending on the piercing system, which mesh, these are usually 3 cm with a panel length of 250 cm.
4. Mount the first strip and check that it fits perfectly in length.
5. Prepare the next strips and install like the first one , fence panels are symmetrical so don't worry, they will all fit perfectly.
6. The strip has enough rigidity and does not require mounting clips, just turn the end of the strip so that it clasps the wire.
7. The tape is smooth with a slight ribbing and highly resistant to staining so that it requires no maintenance. However, if it gets dusty over the years then using a garden hose or pressure washer you can refresh it , don't worry high water pressure won't harm it.